7D73A01HEA 1x Gold 5415+ 8C 150W 2.9G 1x 64GB 9350-8i 2GB Int 8x
2.5" SAS; Open bay Open Open 1x1100W Titanium 6x Std Opt Yes Plat
Yes
Machine types 7D72 - 1 year warranty
7D73 - 3 year warranty
Form factor 1U rack.
Processor One or two 4th-generation Intel Xeon Scalable processor
(formerly codenamed "Sapphire Rapids"). Supports processors up to
60 cores, core speeds of up to 4.0 GHz, and TDP ratings of up to
350 W.
Chipset Intel C741 "Emmitsburg" chipset, part of the platform
codenamed "Eagle Stream"
Memory 32 DIMM slots with two processors (16 DIMM slots per
processor). Each processor has 8 memory channels, with 2 DIMMs per
channel (DPC). Lenovo TruDDR5 RDIMMs, 9x4 RDIMMs, and 3DS RDIMMs
are supported. DIMMs operate at up to 4800 MHz at 1 DPC and up to
4400 MHz at 2 DPC.
Persistent memory No support.
Memory maximum Up to 8TB by using 32x 256GB 3DS RDIMMs
Memory protection ECC, SDDC (for x4-based memory DIMMs), ADDDC (for
x4-based memory DIMMs excluding 9x4 RDIMMs, requires Platinum or
Gold processors), and memory mirroring.
Disk drive bays
Up to 4x 3.5-inch or 12x 2.5-inch or 16x EDSFF hot-swap drive
bays:
Front bays can be one of the following:
10x 2.5-inch hot-swap: All AnyBay
10x 2.5-inch hot-swap: All NVMe
10x 2.5-inch hot-swap: 6x SAS/SATA + 4x AnyBay
10x 2.5-inch hot-swap: 6x SAS/SATA + 4x NVMe
10x 2.5-inch hot-swap: 6x SAS/SATA + 2x AnyBay + 2x NVMe
8x 2.5-inch hot-swap SAS/SATA
16x EDSFF E1.S form factor hot-swap drives
4x 3.5-inch hot-swap SAS/SATA
4x 3.5-inch hot-swap AnyBay
Rear can be one of the following:
2x 2.5-inch hot-swap SAS/SATA bays
2x 2.5-inch hot-swap NVMe bays
2x 7mm 2.5-inch hot-swap SATA bays
2x 7mm 2.5-inch hot-swap NVMe bays
Internal M.2 module supporting up to two M.2 drives, for OS boot
and drive storage support
See Supported drive bay combinations for details. AnyBay bays
support SAS, SATA or NVMe drives. NVMe bays only support NVMe
drives. Rear drive bays can be used in conjunction with 2.5-inch
front drive bays. The server supports up to 12x NVMe drives all
with direct connections (no oversubscription).
Maximum internal storage
2.5-inch drives:
368.64TB using 12x 30.72TB 2.5-inch SAS/SATA SSDs
184.32TB using 12x 15.36TB 2.5-inch NVMe SSDs
28.8TB using 12x 2.4TB 2.5-inch HDDs
15.36TB using 2x 7.68TB 7mm SSDs
EDSFF drives
122.88TB using 16x 7.68TB EDSFF NVMe SSDs
3.5-inch drives:
80TB using 4x 20TB 3.5-inch HDDs
61.44TB using 4x 15.36TB 3.5-inch SAS/SATA SSDs
51.2TB using 4x 12.8TB 3.5-inch NVMe SSDs
Storage controller
12x Onboard SATA ports (Intel VROC SATA RAID, formerly known as
Intel RSTe RAID)
Up to 16x Onboard NVMe ports (includes Intel VROC NVMe RAID, with
optional license for non-Intel NVMe SSDs)
NVMe Retimer Adapter (supports Intel VROC NVMe RAID)
12 Gb SAS/SATA RAID adapters
8, 16 or 32 ports
Up to 8GB flash-backed cache
PCIe 4.0 or PCIe 3.0 host interface
12 Gb SAS/SATA HBA (non-RAID)
8-port and 16-port
PCIe 4.0 or PCIe 3.0 host interface
Optical drive bays No internal optical drive.
Tape drive bays No internal backup drive.
Network interfaces Dedicated OCP 3.0 SFF slot with PCIe 5.0 x16
host interface. Supports a variety of 2-port and 4-port adapters
with 1, 10, 25 and 100 GbE network connectivity. One port can
optionally be shared with the XClarity Controller (XCC) management
processor for Wake-on-LAN and NC-SI support.
PCI Expansion slots
Up to 3x PCIe slots (PCIe 5.0 or PCIe 4.0), all with rear access,
plus a slot dedicated to the OCP adapter. Slot availability is
based on riser selection and rear drive bay selection. Slot 3
requires two processors.
Four choices for rear-access slots:
3x PCIe x16 low-profile slots
1x PCIe x16 full-height half-length slot + 1x PCIe x16 low-profile
slot
1x PCIe x16 low-profile slot (also supports 2x rear 2.5-inch drive
bays)
2x PCIe x16 low-profile slot (also supports 2x rear 7mm 2.5-inch
drive bays)
For 2.5-inch front drive configurations, the server supports the
installation of a CFF RAID adapter or HBA in a dedicated area that
does not consume any of the PCIe slots.
The server alternatively supports slots at the front of the server
(planned for 3Q/2023):
OCP slot
1x PCIe x16 full-height half-length slot + 1x PCIe x16 low-profile
slot
Note: Not all slots are available in a 1-processor configuration.
See the I/O expansion for details.
GPU support Supports up to 3x single-wide GPUs
Ports
Front: 1x USB 3.2 G1 (5 Gb/s) port, 1x USB 2.0 port (also for XCC
local management), External diagnostics port, optional VGA
port.
Rear: 2x USB 3.2 G1 (5 Gb/s) ports and 1x USB 2.0 port, 1x VGA
video port, 1x RJ-45 1GbE systems management port for XCC remote
management. Optional DB-9 COM serial port (installs in slot 3).
Optional second RJ-45 1GbE systems management port for XCC remote
management (installed in OCP adapter slot).
Internal: 1x USB 3.2 G1 connector for operating system or license
key purposes
Cooling Up to 8x N+1 dual-rotor redundant hot-swap 40 mm fans,
configuration dependent. One fan integrated in each power
supply.
Power supply Up to two hot-swap redundant AC power supplies, 80
PLUS Platinum or 80 PLUS Titanium certification. 750 W, 1100 W and
1800 W AC options, supporting 220 V AC. 750 W and 1100 W options
also support 110V input supply. In China only, all power supply
options support 240 V DC. Also available is a 1100W power supply
with a -48V DC input.
Video Embedded graphics with 16 MB memory with 2D hardware
accelerator, integrated into the XClarity Controller 2 management
controller. Maximum resolution is 1920x1200 32bpp at 60Hz.
Hot-swap parts Drives, power supplies, and fans.
Systems management Operator panel with status LEDs. Optional
External Diagnostics Handset with LCD display. Models with 8x
2.5-inch front drive bays can optionally support an Integrated
Diagnostics Panel. XClarity Controller 2 (XCC2) embedded management
based on the ASPEED AST2600 baseboard management controller (BMC),
XClarity Administrator centralized infrastructure delivery,
XClarity Integrator plugins, and XClarity Energy Manager
centralized server power management. Optional XCC Platinum to
enable remote control functions and other features.
Security features Chassis intrusion switch, Power-on password,
administrator's password, Root of Trust module supporting TPM 2.0
and Platform Firmware Resiliency (PFR). Optional lockable front
security bezel.
Operating systems supported Microsoft Windows Server, Red Hat
Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi, Ubuntu
Server. See the Operating system support section for
specifics.
Limited warranty Three-year or one-year (model dependent)
customer-replaceable unit and onsite limited warranty with 9x5 next
business day (NBD).
Parametry a specifikace:
Procesor
Intel® Xeon™ 8-Core
Max. počet CPU:
2
RAM paměť
Počet slotů pro RAM:
32x
Disk / úložiště
Maximální počet HDD:
12
Sloty
Slot PCIe:
Ano
Počet pozic 3,5" externí:
0
Zdroj
Podpora Hot-plug:
Ano
Hot-plug zdroj:
Ano
Rozměry a hmotnost
Typ skříně:
Rack 1U
Obecné
Cache battery backup:
Ano
Počet pozic 5,25" externí:
0
